Clear-Com RS603 2-Channel Belt Pack Station - 3 Available
For use with Clear-Com TW products and a monaural headset.
Features:
- Two intercom channels
- Local input for program audio
- Program audio volume control
- 3-pin male XLR intercom connectors
- Choice of headset jacks for use with Clear-Com-TW or RTS-TW systems, monaural or binaural audio
Specifications:
- General
- Amplifier Design: I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and short-circuit protected.
- Signal to Noise: >75 dB
- Bridging Impedance: >15k
- Line Level: -14 dB, +5 dB max.
- Sidetone Adjust: >35 dB
- EMI and RFI rejection: >60 dB
- Microphone Pre-Amplifier
- Headset Mic Impedance: 200 ohms
- Gain, mic to line: 41 dB (dynamic)
- Limiter Range: 26 dB
- Frequency Response: 200 Hz – 12 kHz contoured for intelligibility
- Program Input
- Program input Balanced, transformer isolated
- Input sensitivity: –20 dBv to +10 dBv
- Frequency response 50 Hz – 18 Hz, ± 2 dB
- Headphone Amplifier
- Load Impedance: 50 - 2,000 ohms
- Output Level: +17 dBv before clipping
- Distortion: <0.1% THD @ 1 kHz
- Gain, line to output: +34 dB
- Frequency Response: 100 Hz - 18 kHz, ±2dB
- Connectors
- Intercom Line: (2) 3-pin XLR–M–F
- Headset: 4-pin XLR–M
- Power Requirements
- 55mA quiescent
- 62mA average talk, both channels simultaneously
- 50mA talk with signaling, both channels simultaneously
- DC Voltage Range: 12-32 volts
- Environmental
- Operating Temp. Range: 0°C - 70°C (32°F - 158° F)
- Humidity: 0 - 90% relative humidity
- Dimensions
- 4.58"H x 3.73"W x 1.34"D (116 x 95 x 34 mm)
- Weight
- 7.8 oz. (0.22 kg)